Monacor PA-906 Manual De Instrucciones página 9

7 Specifications
RMS output power: . . . . . . . . . . . . . . 120 W
Peak output power: . . . . . . . . . . . . . . 160 W
Frequency range: . . . . . . . . . . . . . . . 100 – 15 000 Hz (±3 dB)
S/N ratio: . . . . . . . . . . . . . . . . . . . . . 92 dB
THD: . . . . . . . . . . . . . . . . . . . . . . . . . < 2 % at rated power (1 kHz)
Inputs CH 1 – CH 6
XLR/6.3 mm jack, CH 1 with additional screw terminals
(Input sensitivity, impedance, type of connection)
Switch position "MIC": . . . . . . . . . 1.5 mV, 5 kΩ, balanced
Switch position "LINE": . . . . . . . . . 270 mV, 10 kΩ, balanced
RCA jacks
Switch position "MIC": . . . . . . . . . 26 mV, 5 kΩ, unbalanced
Switch position "LINE": . . . . . . . . . 300 mV, 10 kΩ, unbalanced
Input RETURN: . . . . . . . . . . . . . . . . . 1 V, 10 kΩ, unbalanced
Output SEND: . . . . . . . . . . . . . . . . . . 1 V, 600 Ω, unbalanced
Output SLAVE OUT: . . . . . . . . . . . . 1 V, 600 Ω, unbalanced
Tone controls
BASS: . . . . . . . . . . . . . . . . . . . . . ±10 dB at 100 Hz
TREBLE: . . . . . . . . . . . . . . . . . . . ±10 dB at 10 kHz
Talkover attenuation (VOX): . . . . . . . . 40 dB
Power supply
Mains operation: . . . . . . . . . . . . . 230 V~/50 Hz
Power consumption: . . . . . . . . 320 VA max.
Emergency
power supply: . . . . . . . . . . . . . . . . 24 V
Power consumption: . . . . . . . . 7 A max.
Ambient temperature: . . . . . . . . . . . . 0 – 40 °C
Dimensions (W H D): . . . . . . . . . 430 88 340 mm, 2 RS
Weight: . . . . . . . . . . . . . . . . . . . . . . . 12 kg
Pin configuration of the input jacks CH 1 – CH 6 (9)
XLR
1 = ground
2 = signal + (+48 V phantom power)
3 = signal - (+48 V phantom power)
6.3 mm jack
T = signal + (+48 V phantom power)
R = signal - (+48 V phantom power)
S = ground
Pin configuration of the jacks SEND (18) and RETURN (19)
6.3 mm jack
T = signal
S = ground
Pin configuration of the speaker jacks (17)
6.3 mm jack
GB
9