Installation - Garant Gruppe 92 Manual De Instrucciones

CAUTION
X
X
X
X
Garment locker: Instruction for changing the door hinges:
from left to right
Using suitable pliers, remove the hinge pins from the hinges.
Take off the door and remove the rubber plugs from the corners
of the cabinet.
Remove the hinges from the door and fit them to the opposite
side of the door. The door is reattached by inserting the hinge pins.

5. Installation

WARNING
The cabinet must be secured against accidentally tipping over.
Cabinets that are or will be fitted with drawers, must be anchored
to the floor or wall to protect against tipping and should not be
converted for mobile use.
Cabinets fitted with mobility units may not be fitted with drawers.
Storage equipment must be installed on a stable and level ground.
To ensure secure seating of the grinding wheel in the slide pin,
only one grinding wheel may be stored per mounting!
The maximum static surface load per swing-out arm is 30 kg.
When swinging the carrier in, note that the locking pin will
engage to prevent the arm swinging out again accidentally.
The grinding wheel carriers may be used only for its intended
purpose. It is prohibited to use the carrier as a step, a ladder or
a stool.
www.hoffmann-group.com
DE
EN
FR
IT
ES
35