MELICONI CONTROL 2 SIMPLE Instrucciones De Uso página 9

Ocultar thumbs Ver también para CONTROL 2 SIMPLE:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 13
- SETTING CODES USING A MOBILE PHONE (SMS)
-
(the service is free, the only cost being that of sending the SMS, which depends on your service operator fees)
Send an SMS as follows:
Fixed text which must always be included
Indicate the type of device to be controlled, using one
of the following abbreviations only:
TV
TER (terrestrial digital decoder)
SAT (satellite decoder)
Indicate the brand of the device to be controlled
Indicate the model of the device to be controlled,
usually shown on a label on the back of the device (if
you don't know the model, don't write anything after
the brand)
Example
2N, TV, PHILIPS, 32PFL3614
IMPORTANT - separate the information with a comma, and be as precise as possible so that the IT system can
search the data and respond correctly. Send the SMS to 0039 3457518893 and wait for a reply via SMS. Once you
have received the SMS with the list of codes, set the fi rst code (4 numbers) in the remote control as described in
the ENTERING THE CODE DIRECTLY section. After having entered the code, point the MELICONI remote control at
the device, which should already be ON and press the ON/OFF [ ] button on the remote. If the device does NOT
switch off, set the next code in the SMS list on the remote control and try switching the device off again. Repeat the
operation until the device switches off. When the device switches off, check that the other buttons are also operating
correctly. If they do, the remote control is ready to use. If certain buttons do not work correctly, you are probably
using an incorrect code destined for a very similar device; at this point ignore the SMS list and consult the SETTING
CODES USING A MANUAL CODE section to fi nd a more suitable code.
NOTE : If you don't receive an SMS on your mobile phone or if the message says ERROR or NO CODE, it means the
system has not been able to process the data you have sent. Do not send another SMS use the SETTING CODES USING
A MANUAL SEARCH procedure or contact the technical support.
2N,
TYPE,
BRAND,
MODEL
2N, TV, PHILIPS,
32PFL3614
9

Publicidad

Tabla de contenido
loading

Productos relacionados para MELICONI CONTROL 2 SIMPLE

Tabla de contenido