Features; Assembly; Operation - Ryobi P611 Manual Del Operador

PRODUCT SPECIFICATIONS
No Load Speed ................................................11,000/min.
Maximum Planing Width ....................................... 3-1/4 in.
WARNING:
Do not use this product if it is not completely assembled
or if any parts appear to be missing or damaged. Use of
a product that is not properly and completely assembled
or with damaged or missing parts could result in serious
personal injury.
If any parts are damaged or missing, please call 1-800-525-2579 for assistance.
WARNING:
Do not allow familiarity with tools to make you care-
less. Remember that a careless fraction of a second is
sufficient to inflict serious injury.
WARNING:
Always remove battery pack from the tool when you are
assembling parts, making adjustments, cleaning, or when
not in use. Removing battery pack will prevent accidental
starting that could cause serious personal injury.
WARNING:
Always wear eye protection with side shields marked to
comply with ANSI Z87.1. Failure to do so could result in
objects being thrown into your eyes resulting in possible
serious injury.
WARNING:
Do not use any attachments or accessories not recom-
mended by the manufacturer of this product. The use of
attachments or accessories not recommended can result
in serious personal injury.
APPLICATIONS
You may use this tool for the purposes listed below:
 Planing the edge of a wooden door or shelf

FEATURES

Maximum Planing Depth .........................................1/16 in.
Maximum Rabbet Depth ...........................................1/2 in.

ASSEMBLY

WARNING:
Do not attempt to modify this product or create acces-
sories or attachments not recommended for use with this
product. Any such alteration or modification is misuse
and could result in a hazardous condition leading to pos-
sible serious personal injury.

OPERATION

 Planing the edge of a piece of lumber
 Making rabbet cuts in wood
 Chamfering sharp edges of lumber
ADJUSTING THE EXHAUST DIRECTION
See Figure 1, page 11.
WARNING:
Collected dust from planing surface coatings such as
polyurethanes, linseed oil, etc., can self-ignite in the
planer dust bag or elsewhere and cause fire. To reduce
the risk of fire, always empty the dust bag frequently while
planing. NEVER store or leave a planer without totally
emptying its dust bag. Also follow the recommendations
of the coatings manufacturers.
Change the direction of the exhaust to either the right or left
to control the direction of debris when working in confined
areas.
To adjust the exhaust direction and dust bag:
 Remove the battery pack.
 To adjust exhaust to the right: Move the exhaust direc-
tion lever so the arrow points right (the handle will point
left). Install the dust bag on the right exhaust port.
 To adjust exhaust to the left: Move the exhaust direction
lever so the arrow points left (the handle will point right).
Install the dust bag on the left exhaust port.
NOTE: Check that the dust bag is attached to the same port
selected by the exhaust direction lever.
5 - English