FlexiForce RS200 Manual De Instalación, Utilización Y Mantenimiento página 21

manual
GREASING DOOR PARTS
RE-ADJUSTING THE DOOR
Open and close the door for checking all the settings.
When the door panel is not hanging completely horizontally in the lifting cables in (almost) closed
conditions there are several options for fine adjustment.
A. Loosen the securing bolts of the cable drum and the drum relative to the tube shaft.
B. When a coupling is employed this may be adjusted to ensure a better horizontal setting.
Horizontal movement of the door can be limited
(to max. 5mm) by installing 2065 distance rings on the
roller shafts.
GB
rev.0 Feb-09
RS200 manual GB 2009 www.flexiforce.com
20