Operation Procedure - Magic Chef MCD1310ST Manual Del Usario

OPERATION PROCEDURE

This section includes useful information about oven operation.
1. Plug power supply cord into a standard 3- pronged 15 Amp, 120V AC 60Hz power outlet.
2. After placing the food in a suitable container, open the oven door and put it on the glass tray.
The glass tray and roller guide must always be in place during cooking.
3. Shut the door. Make sure that it is firmly closed.
1
The oven light is on when the microwave oven
is operating or the door is opened.
2
The oven door can be opened at any time
during operation by opening the door. The
oven will automatically shut off.
3
Each time a pad is touched, a BEEP will
sound to acknowledge the touch.
4
The oven automatically cooks on full power
unless set to a lower power level.
5
The display will show ":0" when the oven is
plugged in.
6
Time clock returns to the present time when
the cooking time ends.
WATTAGE OUTPUT CHART
• The power-level is set by touching the POWER pad. The chart shows the display, the power level and
the percentage of power.
Touch the Power pad
once
twice
3 times
4 times
5 times
6 times
7 times
8 times
9 times
10 times
11 times
CNA_MCD1311ST_R-1B4H0A(영).indd 8
7
When the STOP/CLEAR pad is touched
during the oven operation, the oven stops
cooking and all information retained.
To erase all information (except the present
time), touch the STOP/CLEAR pad once more.
If the oven door is opened during the oven
operation, all information is retained.
8
If the START pad is touched and the oven
does not operate, check the area between the
door and door seal for obstructions and make
sure the door is closed securely.
The oven will not start cooking until the door is
completely closed or the program has been
reset.
Make sure the oven is properly installed and
plugged into the electrical outlet.
Power level (Display)
P-HI
P-90
P-80
P-70
P-60
P-50
P-40
P-30
P-20
P-10
P-00
8
Approximate Percentage of Power
100%
90%
80%
70%
60%
50%
40%
30%
20%
10%
0%
15. 4. 21. 오전 9:31