Recalling Measurements In Memory - HealthSmart Premium Serie Manual De Instrucciones

RECALLING MEASUREMENTS IN MEMORY

You can recall up to 120 total measurements in memory (60 per
bank).
1. First, select the correct User bank, press the SET button. The
User symbol will begin to blink. Then press the MEMORY
button to switch between User 1 & 2. Once the desired User
is selected, press and hold the POWER button until the unit
powers OFF.
2. Press and release the MEMORY button. It will display the
average of the last three readings, Fig. 2.
3. Press the MEMORY button again to scroll through the saved
measurements. With the voice function on, the monitor will say
the measurement with the language you selected according to the
classification standard of WHO (World Health Organization).
NOTE: When the number of readings exceeds 60 per bank, the oldest
data will be replaced with the new record.
To erase all stored measurements:
1. Press and release the MEMORY button to enter into the memory
bank mode. Be sure the correct memory bank is selected.
2. Press and hold down the SET button until three horizontal lines
flash. This indicates that all measurements have been erased,
Fig. 3.
19
Fig. 1
mmHg
/
Fig. 2
Fig. 3