Auxiliary Contact Block; Mounting Of Auxiliary Block; Dismounting Of Auxiliary Block; Proceeding With The Material Utilized - WEG FSW 400 Manual De Instrucciones

Seccionadores tipo fusible
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

www.weg.net

5.4. AUXILIARY CONTACT BLOCK

5.4.1. MOUNTING OF AUXILIARY BLOCK

Auxiliary contact block
Exit point of conductors
The conductors of auxiliary contact block should be arranged according to the figure
above, push the auxiliary contact according to the directions of the arrows.

5.4.2. DISMOUNTING OF AUXILIARY BLOCK

Hold and pull the auxiliary contact block as shown below:
Auxiliary contact block

6. PROCEEDING WITH THE MATERIAL UTILIZED

FSW type fuse switch disconnectors are manufactured with the use of materials and
technology which are not harmful to the natural environment.
Obligatory regulations regarding protection of the environment should be respected.
The product utilized should be dismantled and metal parts should be apart from plastic
ones. Useless metal parts should be segregated to non- ferrous metals and others and
they are to be scraped. Plastic parts which can be recycled should be sent to recycling
company. Plastic parts which can not be recycled should be sent to utilization company.
Cardboard packaging and plastic bags which are recycled should be sent to recycling
companies. In case of any doubts please contact with the manufacturer.

7. TRANSPORT AND STORAGE CONDITIONS

Storage should be performed in original packaging, in dry and clean rooms at
temperature higher than -5
C and related humidity not higher than 80% at temperature
o
+35
C. At the highest temperature +40
C air humidity should not be higher than 50%.
o
o
18
Instruction manual for mounting and service of fuse switch disconnectors

Publicidad

Tabla de contenido
loading

Tabla de contenido