NOTE: Make sure the decanter is fully placed on the warming plate or the water
and the grounds will overflow from the filter basket. An overflow may
cause personal injury or damage to property.
CAUTION! To reduce the risk of damaging the decanter and/or the risk
of personal injury, do not add cold water to the decanter if the
!
decanter is already hot. Allow the decanter to cool before using.
BREWING COFFEE NOW
1 After completing the steps in the "Adding Water and Coffee" section and with
the decanter and the filter basket securely in place,
turn the coffeemaker on.
Press the BREW NOW button once to turn the
coffeemaker on (Figure 6). The BREW NOW light will
illuminate to signal that the coffeemaker is on and
brewing. The Audible Ready Signal will beep five times
when the brew cycle is complete.
2 To enjoy a more full flavored cup of coffee, press the
STRONG button once (Figure 7). The STRONG light will
illuminate. The coffeemaker will remain in the STRONG
setting until you change it back to regular strength by
pressing the STRONG button again or until you unplug
the machine.
3 You may adjust the temperature of your coffee by
pressing the KEEP WARM buttons (Figure 8). Pressing
"+" will make your coffee warmer and pressing "-" will
lower the temperature.
4 After the used coffee grounds have cooled, open the lid
and carefully remove the filter basket and discard the
grounds.
5 Prior to making a second pot of coffee, turn the unit
off by pressing the OFF button (Figure 9), otherwise
the Two-Hour Auto Shut-Off time period will not be
restarted.
NOTE: To turn unit off at anytime press the OFF button
once.
6 Make sure the decanter is empty before starting to brew more coffee.
7 Be sure to turn your coffeemaker off when no longer using it.
6
7
8
9
8