Switching On The Flush-Mounted Radio - Gira 0315 Serie Instrucciones De Montaje Y Funcionamiento

Switching on the flush-mounted radio

The flush-mounted radio can be adjusted
to manual mode or sleep mode by pressing
the On/Off button
pressed, respectively.
Manual Mode
The flush-mounted radio is switched on by
pressing the On/Off button once. The radio
remains switched on until the On/Off but-
ton is pressed once again.
Sleep Mode
The Sleep Mode is activated by keeping
the On/Off button depressed until the
sound from the radio is briefly switched
off.
In this setting the radio automatically
switches itself off after 30 minutes. If the
„On" status LED is blinking, the Sleep
Mode has been activated.
The Sleep Mode can also be activated
while the radio is switched on. To do so,
keep the On/Off button depressed for ap-
prox. 5 sec.
i
Automatic switching-on
A special function enables switching on
of the flush-mounted radio together with
the lights or by means of a time switch.
The availability of this function, however,
depends on the type of electrical installa-
tion in your house.
Ask your electrician for advice.
once or keeping it de-
GB
19