Carrying Handle; Electric Brake - Rigid R4122 Manual Del Operador

FEATURES
KNOW YOUR COMPOUND MITER SAW
See Figure 1.
The safe use of this product requires an understanding of
the information on the tool and in this operator's manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.
12 in. BLADE
A 12 in. blade is included with your compound miter saw. It
will cut materials up to 7-1/2 in. wide, depending upon the
angle at which the cut is being made.
ZERO BEVEL STOP BUTTON
The zero bevel lock button provides a positive 0° stop and
allows right bevel angle cuts when pushed.
33.9º
BEVEL STOP ADJUSTMENT SCREWS
See Figure 2.
Bevel stop adjustment screws have been provided on each
side of the saw arm. These adjustment screws are for making
fine adjustments at 0°, 33.9°, 45° and 48°.
NOTE: Use the bevel stop turrets to locate 33.9°, 45°, and
48° bevel angles. When making any non-bevel cut, the bevel ZERO BEVEL
STOP BUTTON
stop turrets should be in the 48° position.
BEVEL STOP
45º

CARRYING HANDLE

ADJUSTMENT
48º
BEVEL STOP
SCREW
See Figure 3.
TURRET
For convenience when carrying or transporting the miter
Fig. 2
saw from one place to another, a carrying handle has been
LOCK
provided. To transport, turn off and unplug the saw, then
PIN
lower the saw arm and lock it in the down position. Lock
saw arm by depressing the lock pin.
DETENT OVERRIDE LEVER
CARRYING
HANDLE
For convenience depress the detent override lever to rotate
miter table without holding down detent release button.
LASER GUIDE

ELECTRIC BRAKE

SWITCH
An electric brake has been provided to quickly stop blade
rotation after the switch is released.
DETENT
RELEASE
LASER GUIDE
BUTTON
For more accurate cuts, a laser guide is included with your
miter saw. When used properly, the laser guide makes
accurate, precision cutting simple and easy.
LASER GUIDE SWITCH
Use the laser guide switch to turn the laser guide on and off.
MITER LOCK LEVER
See Figure 4.
The miter lock lever securely locks the saw at the desired
DETENT
MITER LOCK
miter angle. Push the lever down to lock the saw in place.
OVERRIDE
LEVER
To release the saw, lift the miter lock lever and depress the LEVER
detent release button.
Fig. 3
SAW ARM LOCKED IN DOWN POSITION
10 - English