Section 10: Specifications; Mandatory Disclosures; Performance Specifications; Labels And Markings - Falltech 7262 Manual Del Usuario

Section 10: Specifications

This section contains important information regarding the
performance and construction of this product. Pease read and be
familiar with this and all information contained in this instruction manual.

10.1: Mandatory Disclosures

This instruction manual addresses foreseeable hazards, uses and
applications. If you have questions about your application that are not
addressed in this document, contact FallTech for additional guidance.
It is the responsibility of the employer/issuer of this equipment to
ensure that it is used in a manner consistent with these instructions.
Failure to do so could result in series injury or death. For further reading
and additional information, see Section 10.4 for a listing of relevant
standards with which you should be familiar.

10.2: Performance Specifications

FallTech Web Retractors
Model #s: 7262, 72624, 7263, 8262
Component
Housing Alloy Steel
Drum ABS Plastic
Main Shaft Alloy Steel
Pawls/Ratchet Alloy Steel
Webbing Polyester
Attachment Connector(s) Chro-Moly Alloy Steel
* When tested in accordance with ANSI Z359.1-2007
FallTech Web SRL's
Model #s: 7270WR, 7271WR
Component
Housing Alloy Steel
Drum ABS Plastic
Main Shaft Alloy Steel
Pawls/Ratchet Alloy Steel
Webbing Polyester
Attachment Connector(s) Chro-Moly Alloy Steel
* When tested in accordance with ANSI Z359.1-2007
Material Rating
3,600 lbs
n/a
3,400 lbs
n/a
5,000 lbs
5,000 lbs
Overall static strength: > 3,000 lbs
* Arrest Forces: < 900 lbs
* Deceleration Distance: < 24"
Maximum Capacity: 310 lbs
Material Rating
3,000 lbs
n/a
3,000 lbs
n/a
5,000 lbs
5,000 lbs
Overall static strength: > 3,000 lbs
* Arrest Forces: < 900 lbs
* Deceleration Distance: < 24"
Maximum Capacity: 310 lbs
29
FallTech Web SRL's
Model #s: 7270KV
Component
Housing Alloy Steel
Drum Alloy Steel
Main Shaft Alloy Steel
Pawls/Ratchet Alloy Steel
Webbing Kevlar®
Attachment Connector(s) Chro-Moly Alloy Steel
* When tested in accordance with ANSI Z359.1-2007
FallTech Contractor Web SRL's
Model #s: 7276WR
Component
Housing Nylon 6/6 over Alloy Steel
Drum Aluminum
Main Shaft Alloy Steel
Pawls/Ratchet Alloy Steel
Webbing Dyneema®
Attachment Connector(s) Chro-Moly Alloy Steel
* When tested in accordance with ANSI Z359.1-2007

10.3: Labels and Markings

The labels shown below must be present on the product and must be
legible. If labels are not present and legible, remove the product from
service.
Material Rating
3,000 lbs
n/a
3,000 lbs
n/a
5,000 lbs
5,000 lbs
Overall static strength: > 3,000 lbs
* Arrest Forces: < 900 lbs
* Deceleration Distance: < 24"
Maximum Capacity: 310 lbs
Material Rating
3,000 lbs
n/a
3,000 lbs
n/a
4,500 lbs
5,000 lbs
Overall static strength: > 3,000 lbs
* Arrest Forces: < 900 lbs
* Deceleration Distance: < 24"
Maximum Capacity: 310 lbs
30