Dmx Addressing - ION 3715Z Manual De Usuario

DMX connection and DMX protocol

DMX addressing

The device is controlled by universal DMX 512 protocol, DMX
address is the start channel used to receive instructions from
the external controller. For independent control, each fixture
must be assigned its unique address control channels. For ex-
ample, this device has four channel modes: 19/41/170/19/21,
if we set the mode at standard 19 channels mode, and there
are several models need to be independently controlled, we
just simply address first fixture at 1, and second fixture at 20,
third one at 39, etc.
If the devices have the same address, they will behave
synchronically.
DMX addressing is limited, don't set the address so high that
without enough control channels for the fixtures.
Display is flashing when no DMX signal is received.
Connection: use DMX cable with 5 pin XLR-plugs to connect the
controller with the fixture or one fixture with another.
ION 3715Z
ENGLISH VERSION
p. 12