NZI Premium S Manual De Usuario página 10

GB
head in such a way that it protects both the
forehead and neck (Fig. 2). Do not incline the
helmet forwards or backwards (Fig. 3 & 4).
VISOR
NZI visors are made by thermoforming raw
material that is already completely coated
with an anti-scratch and "mist-retardant"
treatment; these coatings avoid loss of vision
and enhance safety in critical situations. By
10
O W N E R S
using the thermoforming process flexibility,
transparency, scratch resistance and abra-
sion resistance are increased. NZI "mist re-
tardant" visors are ECE/ONU R22.05 homolo-
gated; having high light transmission, accurate
luminous road sign recognition, good spectral
transmission, low light diffusion and good opti-
cal quality.
Instructions for taking care of your visor.
Clean the visor only with water and neutral
soap. To dry the visor it is not necessary to
rub; dabbing will do. We strongly recommend
you to avoid the use of any kind of solvents,
alcohol or abrasive products on the visor. It
is recommended to replace the visor when
scratches or marks appear during the use;
they can impair your view.
Replacing the visor.
Removal:
Place the helmet on a completely flat and solid
surface. Open the visor completely (Fig. 5).
Move the visor in the point and direction that
marks the arrow (Fig. 6) until the maximum
displacement is reached. Pull out the visor in
M A N U A L