Measuring Blood Pressure - Fora Diamond CUFF BP Manual Del Propietário

Important!
If the cuff is relatively lower (higher) than the heart, the
obtained blood pressure value could be higher (lower) than
the actual value. A 15 cm difference in height may result in an
error around 10 mmHg.
4. Press the Power button.
The device will turn on and the cuff will begin to inflate
automatically. Remain still and do not talk or move during the
measurement.

Measuring Blood Pressure

This device provides you different ways to measure your blood
pressure.
When the device detects an irregular heart beat, the IRB symbol
is shown as " " instead of "
please consult your doctor.
" . If the problem still persists,
Important!
Always apply the pressure cuff before turning on the device.
A. Single Measurement
Perform an individual blood pressure measurement.
1. Press the Power button. All the LCD symbols will appear. Then
the cuff will begin to inflate automatically.
Note:
• When the device is connected to your mobile device (via
Bluetooth),you can also initiate the measurement by tapping
.
• The cuff will begin inflate automatically.
2. The heart symbol "
during the inflation.
EN-5
" will flash when a pulse is detected