L.B.White Oval 80 v.2 Manual Del Propietario E Instrucciones página 13

3. Slide on hangers and connect to chains.
4. Connect and hang remaining tubes. Follow the procedures
given in Step 2.
5. The tube assembly should be either hung level, or
with a downward slope away from the burner box not
exceeding 1 in. for every 10 ft. of tube.
FIG. 8
SWAGED TUBE
ON BOX
CLAMP
3 IN. ROUND TUBE
Oval 80 v.2 and Sentinel v.2
POSITION CLAMP
EVENLY
TUBE WELD
SEAM DOWN
NON-SWAGED
TUBE END
HANGER
BRIGHT
ALUMINIZED
TUBE
TUBE WELD SEAM
OVAL 80 HEATERS
OVAL TUBE HANGERS
THIS
ROUND TUBE TO OVAL TUBE CLAMP INSTALLATION
3 IN. ROUND CLAMP (CENTERED WITH BOLTS UP)
Owner's Manual • Oval 80 v.2 and Sentinel v.2
Radiant Tube Heaters
CLAMP
BOLTS UP
ROUND TUBE HANGER INSTALLATION - SENTINEL AND OVAL 80
THIS
CLAMPS MUST BE CENTERED OVER
SWAGED AND NON-SWAGED ENDS OF
CLAMP
NOT THIS
OVAL TUBE
NOT THIS
TUBES
13