Preset Tuning - Teac T-R670 Manual Del Usuario

1
2
a
20
Radio Reception (3)

Preset Tuning

This facility is used to store FM, AM broadcasting from Channel 1
to 30 respectively.
Automatic Memory Presetting
1 Select the AM or the FM band by pressing the
corresponding button.
2 Hold down the MEMORY/SET button for a while.
"AUTOSAVE" is momentarily displayed and the auto preset
process starts, scanning through frequencies searching for,
and automatically storing, receivable stations in presets from
1 to 30.
a How to select preset stations
If the PRESET indicator is lit in the display, press the TUNING
MODE button to turn the indicator off. Then press a preset
number. To tune in to a station stored in preset 2 for example,
press 0, followed by 2.
You could directly press 2 to select preset 2. But when you do
this and then press 6 for example, the unit understands that
you entered "26".
RESET Switch
The preset stations are held in memory for a virtually limitless
period of time. To clear all of them from memory, press the
RESET switch once or twice with a pencil or a ball-point pen
lightly.
ENGLISH