Transmission Over Tone ("Roger Beep"); Button Tones - BRONDI PMR FX-100 TWIN Manual De Instrucciones

1
Function activated with low sensitivity
2
Function activated with medium sensitivity
3
Function activated with high sensitivity
3. To return to stand-by mode, press and immediately release the
PTT communication button. The parameters set up to now will
be saved. If the VOX function is activated, the word "
appear on the display.

6.11 TRANSMISSION OVER TONE ("ROGER BEEP")

ACTIVATION/DEACTIVATION
The "Roger Beep" is a tone issued by your handset every time you
release the PTT communication button after transmission.
To activate or deactivate this tone, follow the simple programming
procedure described below:
1. Press the MENU button 5 times. The handset will enter the
"Roger Beep" programming procedure and the letters "
appear in small print on the display, accompanied by "
big print, fl ashing.
2. Press the + or – buttons to deactivate ("
On
activate (" " on the display) the tone.
3. To exit this programming procedure, press and immediately
release the PTT communication button; the parameters set up
to now will be saved.
6.12 BUTTON TONES: ACTIVATION/DEACTIVATION
Every time you press a button, your handset issues a tone. You
can activate or deactivate this signal by following the simple
programming procedure described below:
1. Press the MENU button 6 times. The handset will enter the button
tone programming procedure and the letters "
in small print on the display, accompanied by "
fl ashing.
Of
" on the display) or
to
" will appear
On
" in big print,
22
VOX
" will
ro
" will
On
" in