Quick Release - McCulloch B40 B ELITE Manual De Instrucciones

S1155295-26,B40 B,BT ELITE 1.fm Page 9 Wednesday, October 19, 2016 11:32 AM
GENERAL SAFETY PRECAUTIONS
The machine's vibration damping system reduces the
transfer of vibration between the engine unit/cutting
equipment and the machine ' s handle unit.
Check that the vibration damping element is undamaged
and securely attached. Contact your McCULLOCH dealer
to replace the vibration damping system. Visit
www.mcculloch.com.
WARNING! Overexposure to vibration
!
can lead to circulatory damage or nerve
damage in people who have impaired
circulation. Contact your doctor if you
experience symptoms of overexposure
to vibration. Such symptoms include
numbness, loss of feeling, tingling,
pricking, pain, loss of strength, changes
in skin colour or condition. These
symptoms normally appear in the
fingers, hands or wrists. The risk
increases at low temperatures.

Quick release

There is an easily accessible, quick release fitted at the
front as a safety precaution in case the engine catches
fire, or in any other situation that requires you to free
yourself from the machine and harness. See instructions
under the heading Adjusting the harness and brush
cutter.
Check that the harness straps are correctly positioned.
Once the harness and machine have been adjusted,
check that the harness quick release works correctly.
Muffler
The muffler is designed to keep noise levels to a minimum
and to direct exhaust fumes away from the user.
In countries that have a warm and dry climate there is a
significant risk of fire. We therefore fit certain mufflers with
a spark arrestor mesh. Check whether the muffler on your
machine is fitted with this kind of mesh.
If the muffler on your machine is fitted with a spark
arrestor mesh this must be cleaned regularly. A blocked
mesh will cause the engine to overheat and may lead to
serious damage.
–
English 9