Publicidad
Idiomas disponibles
Idiomas disponibles
English
SPECIFICATIONS
1. Gas Strip Nailer
Type of power
Applicable nails
Numbers of loadable nails
Size
Weight
Nail-feeding method
Ambient temperature
Battery
Fuel cell
2. Charger (UC7SD)
Input power source
Charging time
Charging voltage
Charging current
Weight
NAIL SELECTION
Choose a suitable nail from Fig. Nails which are not shown
in Fig. can not be driven with this tool.
Only smooth, barbed and ring type nails are used. Do
not use screw nails. Nails are formed into strips which
consist of 25-37 nails.
Paper collated strip nails
Clipped-head nails
Dimensions of nails
STANDARD ACCESSORIES
(1) Eye protector .............................................................. 1
(2) Charger ........................................................................ 1
(3) Case ............................................................................. 1
(4) Hexagonal bar wrench for M5 screw ........................ 1
9
Piston reciprocating
ø 3.0 – 3.3 mm (.120" – .131") See Fig.
25 – 37 nails (1 strips)
347 mm (L) × 353 mm (H) × 108 mm (W) (13-21/32" × 13-29/32" × 4-1/4")
3.5 kg
Piston reciprocation
0°C to 40°C (30°F to 100°F)
EB714S ( 1.4 Ah 6 cells )
Ni-Cd battery, 7.2 V
Type No. 753-600 ........ sold separately
Liquid hydrocarbon; propane, butane 40g/80ml
Single phase: AC 230 V 50 Hz
Approx. 60 minutes (At temperature of 20°C (70°F))
7.2 V
1.6 A
1.1 kg (2.4 lbs)
Min.
Max.
6.8 mm
7.7 mm
(.266")
(.303")
3.0 mm
3.3 mm
(.120")
(.131")
OPTIONAL ACCESSORIES ......... sold separately
Fuel Cell .......................................... Code No. 753-600
Gas Strip Nailer Lubricant
250 cc (8 oz.) oil feeder ............... (Code No. 885-246)
APPLICATIONS
Floor and wall framing.
Truss build-up, Window build-up.
Subflooring and roof decking.
Wall sheathing.
Mobile home and modular housing construction.
CHARGING
Before using the power tool, charge the battery as follows.
1. Insert the battery into the charger
Insert the battery firmly while observing its direction,
until it contacts the bottom of the charger (See Fig. 2).
CAUTION
The UC7SD model is the exclusively designed
charger. These cannot charge batteries except the
specified batteries. It is possible to insert the batteries
other than the specified into the charger and some
of them may light up the pilot lamps. However, you
are requested to exercise utmost caution not to
charge batteries other than specified ones because
these can not only be charged but also such actions
can result in the malfunction of chargers.
2. Connect the charger power cord to the receptacle
Connecting the power cord will turn on the charger
(the pilot lamp lights up).
CAUTION
If the pilot lamp does not light up, pull out the
power cord from the receptacle and check the
battery mounting condition.
Publicidad
