Optional Accessories - Makita FS4000 Manual De Instrucciones

Atornillador para tablaroca
Ocultar thumbs Ver también para FS4000:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

To install the bit, push it firmly into the magnetic bit
holder. Then install the locator by pushing it firmly back
onto the gear housing.
4
3
2
010095
Use of locator holder
1
2
009971
The locator can be temporarily held on the locator holder
during replacing bit or using without locator. To hold the
locator, position the trapezoidal holes of the locator on
the swells of the locator holder and push it in.
OPERATION
009966
Fit the screw on the point of the bit and place the point of
the screw on the surface of the workpiece to be fastened.
Apply pressure to the tool and start it. Withdraw the tool
as soon as the clutch cuts in. Then release the switch
trigger.
1. Locator
1
2. Bit
3. Gear housing
4. Magnetic bit
holder
1. Swells
2. Trapezoidal
holes
3. Locator holder
3
CAUTION:
When fitting the screw onto the point of the bit, be
careful not to push in on the screw. If the screw is
pushed in, the clutch will engage and the screw will
rotate suddenly. This could damage a workpiece or
cause an injury.
Make sure that the bit is inserted straight in the
screw head, or the screw and/or bit may be
damaged.
Hold the tool only by the handle when performing
an operation. Do not touch the metal part.
MAINTENANCE
CAUTION:
Always be sure that the tool is switched off and
unplugged before attempting to perform inspection
or maintenance.
To maintain product SAFETY and RELIABILITY, repairs,
carbon brush inspection and replacement, any other
maintenance or adjustment should be performed by
Makita Authorized or Factory Service Centers, always
using Makita replacement parts.

OPTIONAL ACCESSORIES

CAUTION:
These
accessories
recommended for use with your Makita tool
specified in this manual. The use of any other
accessories or attachments might present a risk of
injury to
persons.
attachment for its stated purpose.
If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
Insert bits
Magnetic bit holder
Locator
NOTE:
Some items in the list may be included in the tool
package as standard accessories. They may differ
from country to country.
6
or
attachments
Only use
accessory or
are

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Fs4200Fs4200aFs4300Fs4300aFs6200Fs6200a ... Mostrar todo

Tabla de contenido