Dometic GROUP Waeco CoolMatic MDC065 Instrucciones De Uso página 31

MDC065(K), MDC090(K)
The cooling device is equipped with an electronic device to protect against
reversing the polarity and short circuits when connecting to a battery.
To protect the battery, the cooling device switches off automatically if the
voltage is insufficient (see table below).
Switch-off voltage
Switch-on voltage
Connecting to 230 V mains supply
D
DANGER!
 Never handle plugs and switches with wet hands or if you are
standing in a puddle.
 If you are operating your cooling device on board a boat with
a mains connection of 230 V from the land, you must install
a ground protection circuit breaker between the 230 V mains
supply and the cooling device.
Seek advice from a trained technician.
➤ To operate the cooling device with a 230 V mains supply, use an WAECO
CoolPower EPS100W or MPS35 rectifier.
EN
Setting up and connecting the cooling device
12 V
10.4 V
11.7 V
24 V
22.8 V
24.2 V
31