Using The Alarm - ION CHARGE TIME iSP99 Guia De Inicio Rapido

Using the Alarm

To set the alarm:
1. Press and hold the Alarm button for 2 seconds. The hours' digits on the display will
flash.
2. Tap the Up () and Down () buttons to set the desired hour.
3. Tap the Alarm button to switch to the minutes' digits, which will flash on the display.
4. Tap the Up () and Down () buttons to set the desired minutes.
5. Press and hold the Alarm button to confirm the alarm time.
6. Enable the new alarm by pressing and holding the Down () button. The Alarm LED will
be lit solid to confirm the alarm is on.
To briefly display the alarm time, tap the Down () button at any time.
To enable or disable the alarm, press and hold the Down () button.
When the alarm is sounding:
•
Press and hold the Alarm button to turn off the alarm. This does not disable or "snooze"
the alarm; the alarm time will be saved and repeat at the same time the following day.
•
Tap any button besides the Alarm button to snooze the alarm. The alarm will repeat
again after 9 minutes.
9