5.
S/PDIF Coaxial Out
Use an SPDIF coaxial cable to trasfer audio signals to a device that has S/PDIF input
Viewing the Connections - Side Connectors
1.
CI Slot is used for inserting a CI card. A CI card allows you to view all the channels that
you subscribe to. For more information, see "Conditional Access" section.
2.
USB Inputs.
Note that programme recording feature is available via these USB inputs. You can
connect external hard disk drives to this input.
3.
TV control buttons.
4.
Side audio-video connection
external devices. To make a video connection, you must use the supplied AV connection
cable for enabling connection. First, plug singular jack of the cable to the TV's Side AV
socket. Afterwards, insert your video cable's (not supplied) connector into the YELLOW
input (located on the plural side) of the supplied AV connection cable. Colours of the
connected jacks should match.
To enable audio connection, you must use RED and WHITE inputs of the side AV
connection cable. Afterwards, insert your device's audio cable's connectors into the RED
and WHITE jack of the supplied side AV connection cable. Colours of the connected
jacks should match.
Note: You should use audio inputs of side AV connection cable (RED & WHITE)
to enable sound connection when connecting a device to your TV by using PC or
COMPONENT VIDEO input.
5.
Headphone jack is used for connecting an external headphone to the system. Connect to the
HEADPHONE jack to listen to the TV from headphones (optional).
Power Connection
IMPORTANT: The TV set is designed to operate on 220-240V AC, 50Hz.
•
After unpacking, allow the TV set to reach the ambient room temperature before you connect the set to the
mains. Plug the power cable to the mains socket outlet.
Aerial Connection
•
Connect the aerial ,cable TV plug to the AERIAL INPUT socket located at the rear of the TV.
01_woypbpr_[GB]_MB60_1900UK_PVR_BRONZE17_16911WLED_10072246_50184497.indd 8
01_woypbpr_[GB]_MB60_1900UK_PVR_BRONZE17_16911WLED_10072246_50184497.indd 8
outputs digital audio signals of the currently watched source.
input is used for connecting video and audio signals of
English - 8 -
08.02.2011 11:37:18
08.02.2011 11:37:18