Publicidad
Idiomas disponibles
Idiomas disponibles
When installing the microSD card,
pay attention to the direction of the
outlet, tilt the memory card slot co-
ver, insert the memory card until it
is fully inserted and close the cover.
The phone supports microSD cards.
3. Inserting the battery
Insert the battery according to the
markings, the battery contacts in the
contacts on your phone and press
the top of the battery down until it is
inserted into the battery slot.
• Remove the battery - First, turn off
the phone, put him face down and
slide the battery cover, remove the
cover and remove the battery.
• Charging the battery
Insert one end of the adapter into the jack and the other end into
the charging socket. If the phone is switched on the battery icon
is displayed in the upper right corner of the screen. If the indicator
is full and stop change, the battery is fully charged. If the phone is
off during charging, a charging icon appears on the screen. After
charging, disconnect the plug.
NOTE: Before first use charge for at least 4 hours. It will reach its
maximum capacity after several cycles of charging and discharging.
4. Power on/off
• Press and hold the power button to turn on
or turn off the phone.
NOTE: Do not switch the phone on the premises, where it is for-
bidden to use the cellular network, or in places where it may cau-
se interference or danger. Make sure that the "Auto On / Off" is
deactivated.
EN
3
7
3
1
2
Publicidad
