Electronic Scale Instructions - MasterCool 98209 Manual De Instrucciones

1) Open the battery cover and insert 2 AAA batteries
according to the polarity indicated in the battery
compartment.
2) Press the ON/OFF/TARE key. The display will show
"8888" and transition to "0"
3) Put the object on the center of the tray. The display will
show the weight of the object. If the weight exceeds the
capacity, "0-Ld" will appear on the display.
4) TARE WEIGHING
This scale is designed with a tare weighing function. When "0" is displayed, put the container
on the tray. Press the ON/OFF/TARE key, the display will transition to "0." Then put the object in
the container.
5) UNIT CHANGE
You can change the weight unit by pressing the UNIT key.
6) POWER OFF
When you finish the operation, you can turn off the scale by pressing and holding the
ON/OFF/TARE key. This scale is designed with an auto-off function to save the battery power.
It automatically turns off its power if the scale is not used within 2 minutes.
7) BATTERY REPLACEMENT
If " " message appears in the display when attempting to weigh, replace and insert
2 AAA batteries according to the polarity indicated in the battery compartment.
CARE
1) This scale is manufactured and adjusted precisely. Do not dismantle the scale nor give it any
strong shock or vibration.
2) Do not use the scale under direct sun and keep it away from heating appliances such as oven,
stove etc.
3) When the scale is to be used in a new location where the temperature differs from the
previous location by 20˚C or more, leave the scale in the new location for at least 2 hours
before using it.
4) When the scale is dirty, wipe the scale with a damp cloth.
5) When the scale is not used for a long period of time, remove the batteries.
2

98209 ELECTRONIC SCALE INSTRUCTIONS

www.mastercool.com
English