BATTERY POWER AND TOUCH SCREEN CALIBRATION
≥
Your MP5 Energy™ has an integrated rechargeable Li-Ion battery. It comes fully
charged from factory, but it is recommended to perform a full recharge before the
first use.
Recharge the battery connecting the player to a computer using the included USB
2.0 cable (using any USB type mini-B with 5-pins will also work).
Optionally, you can recharge the battery with an AC/DC power adaptor with an USB
connector (USB type mini-B with 5-pins) (Note: the output of the AC/DC must be
500mA maximum).
Charging time is between 3 and 5 hours, depending if the player is powered off
or working. To keep the battery in good conditions, we recommend not using the
player while charging and not leaving it charging for more than 8 hours.
Your MP5 Energy™ uses two systems for battery saving: It can power off the LCD
display after some seconds of inactivity, and it can power off completely after
some minutes of inactivity. Both systems are configurable, respectively, browsing
the menus SETTINGS -> Display Setting and SETTINGS -> Auto Shut Time. In order
to maximize the battery's lifespan, it is recommended not to disable completely
these power saving features.
Touch screen calibration: If the icons do not respond when are touched with the
stylus or your finger, please recalibrate the touch screen. To do so, being at the
main menu, briefly displace to the right side the ON/OFF button and touch with the
stylus the red points indicated by the system.
46