The following is required for installation:
• Fixings: screws, max. Ø: 4.5 mm
• F-type connector plug as per EN 61169-24.
• An inner cable conductor diameter greater
than 1.2 mm, or the presence of burrs may
damage the sockets on the unit.
Block diagram VOS 43/RA
Attenuation Pre-emphasis
Pre-emphasis Attenuation
Input
Connection example
VOS 32/RA-1G
VOS 43/RA
HTP
KAZ 12
Attenuation
Pre-emphasis
Attenuation
Standard in-house distribution network for 24 connections in
central star structure with modem outlets
ESM 30
(ESM 40)
3 / 4
Max. 2 mm
excess length
Tightening
torque 3.4 Nm
(danger of
overwinding)
Output
Diameter
0.6-1.2 mm
free of burrs