Use - Imetec Bellissima My Pro Beach Waves Multi GT21 100 Instrucciones De Uso

• During use, when the plates heat and cool, position the appliance
on a smooth and heat resistant surface.
• While straightening, careful not to bring the heated parts to close
to sensitive parts of the face, ears, neck or skin.
• After use, allow the styler to cool down completely before putting
it away.
WARNING! This appliance is not to be
used if it has been dropped or if there
are visible signs of damage.
WARNING! DO NOT use this appliance
near bathtubs, showers, basins or
other vessels containing water. Never
place the appliance into water.
WARNING! Risk of fire. DO NOT use
flammable products on hair or on the
appliance.
PREPARING YOUR HAIR
• Wash hair as normal and comb to remove knots.
• Dry your hair and brush from the roots to the ends.
• Divide hair into sections and start straightening from the nape of
the neck.
INSTRUCTIONS FOR USE
The styler can create 4 different types of waves (wave 1, wave 2, wave
3, wave 4) and is preset to wave 1.
Set waves 2, 3 and 4 as follows:
• Hold the styler with the LED display (2) facing upwards to unlock
the plates (5).
• Pull the wave adjustment knob (9) outwards (FIG. A) and rotate it
by 180° to the right (FIG. B).
• The mobile barrel for waves (8a) changes height with every 180°
rotation.
• Each height corresponds to a different type of wave (in this order:
wave 2, wave 3, wave 4).
• Connect the power cable to the mains.
Switch on the styler by sliding the on/off temperature adjustment button
(3) to the left to the desired temperature:
• Select the desired temperature from the 3 temperatures available
(170°C - 190°C - 210°C) by pressing the + or - buttons (3).
• The straightener is ready for use when the temperature on the display

USE

13
EN