Independent Operation; Operation With A Dmx Controller - IMG STAGELINE BEAM-40/RGBW Manual De Instrucciones

4 Operation
The control buttons MENU, UP, DOWN and
ENTER are used to select the operating
mode and various functions (fig. 3). The
mode or the setting will be displayed.
Button Function
To select the operating mode and
MENU
the setting options
UP
To change the setting
DOWN
To save the setting,
ENTER
to activate the function selected

Functions of the control buttons

4.1 Independent operation

For independent operation, a light show pro-
gram can be activated:
1) Press the button MENU repeatedly until
or is displayed.
2) Select the program speed with the button
UP or DOWN:
= fast
= slow
Press the button ENTER to confirm.
3) For a music-controlled program, press
the button MENU repeatedly until
(Sound off) is displayed. Press the button
UP or DOWN to go to
and press the button ENTER to confirm.
(Sound on)
Ž
Control menu

4.2 Operation with a DMX controller

DMX stands for Digital Multiplex and means
digital control of multiple DMX units via a
common control line. The functions of the
channels and the DMX values can be found
in chapter 4.2.3. For control via a DMX con-
troller (e. g. DMX-1440 or DMX-510USB), the
following numbers of DMX channels are
available:
BEAM-40/ RGBW: 11 or 13 channels
BEAM-40/ WS:
ENTER
Setting of DMX mode and
UP
start address, factory-set
DOWN
address: 001
MENU
ENTER
Number of DMX channels
UP
BEAM-40/ WS:
DOWN
BEAM-40/ RGBW: 11 or 13
MENU
ENTER
Light show program
UP
01 = fast
DOWN
02 = slow
MENU
ENTER
Music control
UP
DOWN
oF = off, on
MENU
ENTER
Opposite pan direction of
UP
moving head:
DOWN
oF = no, on = yes
MENU
ENTER
Opposite tilt direction of
UP
moving head:
DOWN
oF = no, on = yes
MENU
ENTER
Display mode for upside-
UP
down installation:
DOWN
oF = no, on = yes
MENU
ENTER
Reset to factory settings
UP
DOWN
oF = no, on = yes
MENU
ENTER
Reset
MENU
bold = factory setting
7 or 9 channels
7 or 9
9