Operation; Switching The Appliance On / Off; Buttons On The Remote Control; Using The Appliance - Profi Care PC-BSR 3042 Manual De Instrucciones

The charge control lamp on the
charging process:
Flashes green = the rechargeable battery is charging.
Lights up green = the rechargeable battery is fully charged.
• Prior to first use, charge the appliance for at least
6 hours.
• After a maximum of 6 hours or as soon as the indicator
light stays on permanently, the charging process needs
to be stopped.
CAUTION:
• Route the cable of the power adapter in such a way
that nobody can trip over it.
• Do not charge the rechargeable battery unsupervised.
• Always remove the mains plug from the power outlet
after charging is complete.
NOTE:
• Once the rechargeable battery is almost empty, you
will hear a beep. The power indicator light on the
button flashes red and the appliance switches off. The
power indicator light goes out after around 60 seconds.
• Even when switched off, the rechargeable battery
discharges continuously. If the appliance is out of use
for a longer period of time, charge the rechargeable
battery at least once every 4 to 6 weeks.

Operation

Switching the Appliance On / Off

• The appliance is switched on when the main switch /
is set to position .
• Switch off the appliance by setting the main switch to
position .

Buttons on the Remote Control

The appliance is mainly operated via the remote control
buttons. The remote control signals are transmitted to the
appliance via infrared light. To operate the appliance with
the remote control, it must be within sight. Point the remote
control at the infrared receiver.
• RESPOND
In standby or during operation, the appliance will emit a
beeping sound.
• START / PAUSE
Switches the appliance on or into standby.
• RANDOM
The appliance is operating in "Random" mode. Based
on the room, the appliance automatically opts for the
best travel route.
• AUTO
The appliance is operating in "Systematic"
mode. It will zigzag between two obstacles
as shown in the adjacent illustration.
44
PC-BSR3042_IM
button indicates the • FOCUS
The appliance is operating in "Spot" mode. It
moves, as shown in the adjacent illustration,
from the centre of an area in an ever-grow-
ing circle.
/ / /
•
The appliance moves forward, to the right, backwards
and to the left. While in standby, these buttons are
without any function.

Using the Appliance

WARNING:
• Pay particular attention to the safety of babies, young
children and the elderly while the appliance is in
operation. Make sure that no one stumbles over the
appliance.
• Do not touch the wheels and side brushes with your
hands during operation.
CAUTION:
• Do not leave the appliance switched on unattended,
so that you are able to intervene if it is handicapped by
furniture / objects.
• If anything gets stuck in the nozzle and obstructs the
appliance during operation, switch it off immediately
and remove the obstacle.
1. Prior to each use, ensure that the dust container and
filters are in place, empty and cleaned.
2. Place the appliance in the middle of the room to be
cleaned.
3. Switch on the appliance with the main switch. The appli-
ance is now in standby mode.
4. Press the START / PAUSE button. The operation indica-
tor lights up orange. The appliance starts cleaning the
floor in RANDOM mode.
5. If desired, select another cleaning mode (AUTO,
RANDOM or FOCUS).
NOTE:
Should the appliance encounter too many obstacles
while operating in FOCUS or AUTO mode it will auto-
matically switch to RANDOM mode.
6. The appliance cleans the floor until the battery is empty
or it is switched off manually.

Stopping Operation

• Stop the appliance by pressing the START / PAUSE
button.
• Bring the main switch into position to switch off the
appliance.
• Empty the dust container and clean the filters and sen-
sors as described under "Maintenance and Cleaning".
03.07.19