WOXTER Big Bass 500 R Manual De Usuario página 6

REAR BOARD INTERFACE
1. INPUT : For signal input (to connect
with DVD player、 PC、 Mobile、 MP3/MP4
2. OUTPUT: To connect with satellite
speakers
3. LED ON/OFF: To light on or light off
the LED ring on main panel
4: POWER ON/OFF: Press it to power on
or power off the system.
5: AC POWER CABLE: To connect with
AC power outlet
OPERATIONS:
PLAYING BLUETOOTH
1. With the unit powered ON, press the MODE button to select BT mode,
the LED light will fast flash blue and followed a chime of "du-du" , means
system is ready for pairing.
2. Use the controls on your Bluetooth device to select Woxter Big Bass 500R
in your Bluetooth settings. If your device requests a password, enter the
default password 0 0 0 0, when successfully paired, a chime of "du" will be
sounded. the LED light will flash blue. then start BT playing.
3. Press the button to play or pause playing.
4. Press the - or
4. Long press the above buttons for a fast re-wind or fast forward.
5. Turn the Volume knob to adjust main sound volume,
6. Turn the Bass knob e to adjust Bass sound.
7. Turn the Treble knob to adjust Tr
PLAYING USB/SD
1. Plug in USB/SD card, the system will play USB/SD music automatically
while the LED light will flash blue or press Mode button to select USB/SD
mode and play. (The system supports a priority playing of latest sound
source connected).
2. Please follow the next steps as in the epigraph "Connect the Bluetooth".
CONNECT THE AUX-IN
1. Connect the system with external device by attached stereo cable (one
terminal of the signal input cable into the input ports of the system and the
other end into the output port of the external audio device.)
2. Press the Mode button to select AUX mode, the LED light on red and then
start playing files/songs from the device connected.
3. Please follow the next steps as in the epigraph "Connect the Bluetooth".
button to play the previous or next track/song.
EN
5