Care And Storage; Troubleshooting Guide; Specifications - Beurer TL 100 Manual De Instrucciones

Beurer LightUp app
You can control all of the device's functions with the Beurer LightUp app on your smartphone. To control the
device's functions with the app on your smartphone, proceed as follows:
1. Ensure the device is switched on.
2. Download the Beurer LightUp app from the Apple App Store (iOS) or Google Play Store (Android).
3. Open the Beurer LightUp app.
4. Activate Bluetooth® on your smartphone. In the Bluetooth menu on your smartphone, select TL 100; the
blue Bluetooth LED on the device's front panel will illuminate when it is paired.
5. Select the TL 100 device in the app settings. You can now control the device from the app.
Light
You can switch the device on and off using the app as well as adjust brightness and set the timer.
• By clicking the Light Bulb image on your phone, you can turn the device on and off.
• Timer and brightness can also be controlled by moving their corresponding slides on the app.
Mood light
You can also use the app to adjust the mood light. You can select from ten pre-configured mood light
settings (scenes, each with its own brightness control and timer). After activating a mood light setting, the col-
or-changing mood light illuminates. The pre-configured mood light settings can only be adjusted from the app.
• Turn on the moodlight by clicking the power button in the "moodlight" section of your app.
• Here you can use the slider to select your desired brightness, scene, and duration of light.

5. Care and Storage

• Before cleaning the unit, always switch it off, unplug it, and let it cool.
Do not immerse unit in water or other liquids. Use a slightly damp cloth to clean the device. Do not use
abrasive detergents.
• Do not touch the unit with wet hands while it is plugged in; do not allow any water to be sprayed onto the
unit. The unit must be operated only when it is completely dry.
• If you are not going to use the device for an extended period of time, disconnect it and store it in a dry
place, out of the reach of children.

6. Troubleshooting Guide

Problem
Device does not light up

7. Specifications

Dimensions (W x H x D)
Weight
Lighting elements
Power
Light intensity
Radiation
Possible cause
On/Off Button switched off.
No electricity.
LEDs have reached the end of their
service life or are faulty.
14.4 x 13.2 x 8 inches (366 x 335 x 203 mm)
40 oz. (1130 g) [43.8 oz. (1243 g) including AC Power Adapter]
LED
36 Watts
approx. 10,000 lux (@10 cm)
Output of radiation beyond the visible spectrum (infrared and UV) is so low
that it is harmless to eyes and skin.
5
Solution
Press the On/Off Button.
Power cord is faulty or not con-
nected to a working outlet.
Contact customer service for repair
or replacement.