Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Replacing the fuse
If the lamp burns out, the fine-wire fuse of the device might fuse, too. Only replace the fuse by a fuse of same
type and rating.
Before replacing the fuse, unplug mains lead.
Procedure:
Step 1: Unscrew the fuseholder on the rearpanel with a fitting screwdriver from the housing (anti-
clockwise).
Step 2: Remove the old fuse from the fuseholder.
Step 3: Install the new fuse in the fuseholder.
Step 4: Replace the fuseholder in the housing and fix it.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by authorized dealers only in
order to avoid hazards.
Should you have further questions, please contact your dealer.
TECHNICAL SPECIFICATIONS
Power supply:
Power consumption:
Dimensions (LxWxH):
Weight:
Maximum ambient temperature t
Maximum housing temperature t
Fuse:
Fitting lamp:
8 x GE ENH 120 V/250 W GY-5,3
8 x OMNILUX ENH 120 V/250 W GY-5,3
8 x PHILIPS ENH 120 V/250 W GY-5,3
Cooling off period:
Accessory:
EUROLITE Foot-switch with stereo jack
Please note: Every information is subject to change without prior notice. 15.07.2008 ©
230 V/50 Hz
700 W
405 x 200 x 310 mm
5.5 kg
:
45° C
a
:
90° C
B
F 5 A, 230 V
Article number:
No. 88265000
No. 88265005
No. 88265015
10 minutes
Article number:
70064490
18/33
00026772.DOC, Version 2.1
Publicidad
Tabla de contenido
