Software Update - Snom PA1 Guia De Inicio Rapido

S
OFTWARE UPDATE
A
UTOMATICALLY
1. Web interface > "Advanced" setup > "Update" tab.
2. Select update policy from the list box.
3. Enter the settings server's URL in the "Setting URL" text fi eld.
4. Change the default settings of "Settings refresh timer", "Subscribe
Confi g", and "PnP Confi g", if necessary.
5. Click on "Reset".
M
ANUALLY
1. Web interface > "Advanced" setup > "Update" tab.
2. Select "Never update, do not load settings" from the list box of "Update
policy".
3. "PnP Confi g": Select the radio button "off".
4. Enter the fi rmware link in the text fi eld of "Upload Setting fi le manually"
5. Click on "Load".
The PA1 starts to reboot. The red LED will light up, the green LED will go
out. The fi rmware update is done when both LEDs start to blink.
CAUTION: Cutting off the device's power during a fi rmware update
(red LED on, green LED off) will damage the fi rmware and render
the PA1 inoperational.
Do NOT remove the device's power supply (Ethernet cable when
using PoE, power supply connection when not using PoE) while a
fi rmware update is ongoing.
snom PA1 Quick Start Guide
E
N
G
L
I
S
H
17