Recording With Digital Input; To Start/Stop Recording In Sync With The Source Player (Synchro-Recording) - Sony MD WALKMAN MZ-R35 Manual De Instrucciones

Recording with digital
input
This unit has a built-in sampling rate
converter so that you can record
programs from digital equipment using
other sampling rates, such as a BS tuner
or a DAT deck.
CD player, MD player,
digital amplifier, etc.
Optical
plug
POC-15B etc.
(not supplied)
POC-15AB etc.
(not supplied)
to LINE IN
(OPTICAL)
1
Insert a recordable MD and start
recording.
For recording operations, see
"Recording an MD right away !"
(page 6). To record from a portable
CD player, set the CD player to pause
and then start recording.
LINE IN (OPTICAL) jack is for both
digital and analog input
The recorder automatically recognizes the
type of line cable and switches to digital or
analog input.
Notes
•You can make a digital recording only from an
optical type output.
•When recording from a portable CD player,
play it on AC power and disable the anti-skip
function (such as ESP*).
* Electronic Shock Protection
Portable CD
player, etc.
Optical
mini-
plug
To start/stop recording in
sync with the source player
(Synchro-recording)
You can easily make digital recordings of
a digital source on an MD.
Before synchro-recording, make
connections to the digital source with a
digital cable, and insert a recordable MD.
CD players,
etc.
SYNCHRO REC
1
Slide SYNCHRO REC to ON.
"SYNC" appears in the display.
SYNC
2
Press and slide REC to the right.
The recorder stands by for recording.
3
Play the source sound.
The recorder starts recording when it
receives the playing sound.
To stop recording, press p.
continued
11
-EN