Programming Options - Velleman HAA2850 Manual Del Usuario

8. Programming options

The default master code is 0000. Personalize this code as soon as
possible to increase system security.
First time entering programming mode.
Set user mode
Set master and user codes for single user mode.
Notes: master code
• When programming the codes, it is recommended to program the
master code before the user codes.
• If you are programming a new master code, do not use a
combination that is already taken for a user code.
• If you have forgotten the master code, you can reset it. See
Resetting the master code in section 9.
Notes: user code
• Any user code must be different from the master code.
• It is recommended to program a different code for every user.
4 digits
4 digits
4 digits
Set master and user codes for multi user mode.
Notes: master code
• When programming the codes, it is recommended to program the
master code before the user codes.
• If you are programming a new master code, do not use a
combination that is already taken for a user code.
• If you have forgotten the master code, you can reset it. See
Resetting the master code in section 9.
Notes: user code
• Any user code must be different from the master code.
v4 - 15.11.2013
Use the master code 0000 to enter programming mode for
the first time.
Set system to single-user mode, clear all previously stored
data and refresh (default). Note: wait ±3s until
confirmation beeps are heard before continuing.
Set system to multi-user mode, clear all previously stored
data and refresh. Note: wait ±3s until confirmation beeps
are heard before continuing.
master code
user code 1 for output 1 (with duress code function)
user code 2 for output 2
HAA2850
10
©Ve llema n nv