Cleaning, Care & Maintenance; Troubleshooting - Buffalo GL346 Manual De Instrucciones

Cleaning, Care & Maintenance
• Always turn off and disconnect the appliance from the power supply before cleaning.
• Use soapy water and a damp cloth to clean the exterior of the appliance.
• Dry thoroughly after cleaning.
De-scaling
In hard water areas lime scale can build up within the appliance after prolonged use. To de-scale the
appliance:
1. Pour a solution of de-scaler and water into the appliance.
2. Brush the interior gently with a soft bristled brush.
3. Discard the solution collected in the jug.
4. Fill the appliance with clean water and turn back On to flush out the system. Flush out the system
thoroughly to remove any de-scaler residue.
5. The appliance is now ready for use.
Note: Use a suitable de-scaler and always follow the instructions on the
container.
BUFFALO recommend that this appliance is de-scaled every 3 months or more
frequently in hard water areas.

Troubleshooting

Fault
The unit is not The unit is not switched on
working
Plug and lead are damaged
Fuse in the plug has blown
Power supply
Internal wiring fault
Thermal fuse has activated
Power light comes Thermostat fault
on but water
does not reach
temperature
The tap is leaking The tap has become loose
GL346-GL349_ML_A5_v4_20190628.indb 5
Probable Cause Solution
Check the unit is plugged in correctly and
switched on
Call BUFFALO agent or qualified Technician
Replace the plug fuse
Check power supply
Call BUFFALO agent or qualified technician
Reset Thermal fuse (see page 4)
Call BUFFALO agent or qualified technician
Tighten the tap handle
UK
5
2019/6/28 17:14