Securing The Child With The 5-Point Belt System; Opening And Width Adjustment Of The 5-Point Belt System; Securing The Child - Kiddy click'n move 3 Manual De Uso

WARNING
Make sure by a pulling test that the bumper bar
is always closed correctly when seat unit is in
use.
WARNING
Never use the pushchair seat without bumber
bar.

4.6 Securing the child with the 5-point belt system

WARNING
Avoid serious injury from falling or sliding out.
Always use the 5-point belt system in described
manner when you use your kiddy click'n move3
with pushchair seat.

4.6.1 Opening and width adjustment of the 5-point belt system

To open the belt system, press the red button on the buckle.
To widen the belt system, keep the locking button „PRESS" of central adjuster
pressed (fig. 18; no. 1) and then pull both shoulder belts out to the front (fig. 18;
no. 2).

4.6.2 Securing the child

Place the child in the seat unit and place the shoulder belts over its shoulders.
Now place both belt tongues on top of each other (fig. 19; no. 1) and slide them
into the buckle (fig. 19; no. 2) until you hear a clicking noise.
EN
45 45