Cleaning Your Appliance - Krups PERFECT MIX 9000 MiniPro Manual De Uso

KR_MINI-BLENDER_PERFECT-MIX_8080012620_MISEENPAGE07/05/1315:50Page15

CLEANING YOUR APPLIANCE

Unplug the appliance and remove the bowl or accessories.
The blades and accessories are sharp, handle them with care.
To facilitate cleaning, the blade unit (D1) can be detached from the bowl (D4) by pressing on the click
button (D2) (fig 8a 8b 8c).
The bowl (D) the accessories (E) and (F) can be washed in the top basket of the dishwasher using the
"ECO" or "LIGHT WASH" programme.
To clean the motor unit (A), use a damp cloth and dry it carefully. Never immerse the motor unit (A)
in water or any other liquid.
WHAT TO DO IF YOUR APPLIANCE DOES NOT WORK
Problems
The appliance
does not work.
Excessive vibra-
tion.
Leak through lid.
Leak from the
bowl or accesso-
ries
The blade does
not rotate easily.
Causes
It is not plugged in.
The bowl (D) or the accessories
(E) and (F) are not correctly as-
sembled or positioned on the
motor unit (A).
The appliance is not on a flat,
stable surface.
Volume of ingredients is too high. Reduce the quantity of ingredients processed.
Error in assembling the accesso-
ries.
Volume of ingredients is too high. Reduce the quantity of ingredients processed.
The lid is not fitted correctly.
Incorrect positioning of the seal
on the blade unit (D1)(E1)(F1).
The blade unit (D1)(E1)(F1) is in-
sufficiently or incorrectly locked
on the bowl (D4)(E4)(F4).
Pieces of food that are too big or
too hard.
Solutions
Plug the appliance in using a plug with the same
voltage.
Check that the bowl or accessories are cor-
rectly assembled; dismantle and start to assem-
ble again (Fig 2.a, 2.b and 2.c) and check that
they are far down enough on the motor unit.
Maintain pressure on the accessory lid (E) or (F)
during operation.
Put the appliance on a flat surface.
Check that the bowls (E4) (F4) are correctly as-
sembled with the blade units (E2) (F2) associa-
ted with them, the coloured markers should be
identical.
Check that the seal is in place (D5) on the lid
(D6). Correctly position the lid (D6) on the bowl
(D). Lock the button (D7).
Make sure that the seal is correctly positioned,
the lips of the seal should be visible and it
should not be buckled (fig1). Handle the
blade units (D1), (E1), (F1) with care be-
cause the blades are sharp.
Make sure that the blade unit and the bowl are
fitted together correctly be pressing at the top
of the button (D2)(fig2c) or on the buttons
(E2)(F2) (fig5c)
Reduce the size or quantity of the ingredients
processed.
Add liquid to the bowl mix without exceeding
the maximum level.
English
15