Belkin F5D6130 Manual Del Usuario página 23

CONFIGURING THE WIRELESS NETWORK SETTINGS
2. If using 64-bit encryption, there will be four key fields. If using 128-bit
encryption, there will be one key field. In the key field(s), type in the
hexadecimal key(s) that you wish to use. When finished typing in your
keys, select which key you want to use by clicking the radio button next to
it. Click "Apply Changes".
3. Encryption in the AP is now set. Each of your computers on your wireless
network will now need to be configured with the same hexadecimal key.
Refer to the documentation of your wireless network adapter for
information on making this change.
Setting MAC Address Filtering
The MAC address filter is a powerful security feature that allows you to specify
which computers are allowed access to the Access Point. Any computer NOT in
the list will be denied access to the network.
To Enable the MAC Address Filter
1. Place a check mark in the "Enable MAC Address Filtering" box (1).
2. Enter the MAC addresses of a computer that you want to allow access to
the network.
3. Click "Add" (2) to add the address to the list.
4. Repeat for each computer you want to add to the list.
5. Click "Apply Changes" to finish.
20
(1)
(2)