6
Part list
Item
Qty. Part name
1
1
Warming rack
2
1
Cooking plate
3
5
Flame tamer
4
1
Cooking grid 1
5
1
Cooking grid 2
6
1
Barbecue unit, pre-assembled
7
1
Grease tray
8
1
Side burner table
9
1
Side table
10
1
Side table panel
11
2
Lower cupboard door
12
1
Side frame, left
13
1
Rear panel
14
1
Knob
15
1
Knob base
16
1
Side burner table panel
17
1
Electrical ignitor
18
1
Side frame, right
19
2
Door handle
20
1
Cross bar
21
1
Bottom plate
22
2
Castor W/ brake
23
2
Castor W/O brake
24
1
Grease box support
25
1
Grease box
26
1
Side burner rack
27
1
Side burner
28
2
Side table support A
29
2
Side table support B
30
1
Gas tank bottom
31
2
Magnet base
32
1
Side burner ignition pin
1
Screw card with assembly material
Guarantee claims and warranty
Your LANDMANN barbecue left the factory
in a technically flawless condition.
For this reason, in addition to your statutory warranty claims
LANDMANN also offers an extended quality and durability
warranty against rusting through on the following parts:
Burner
Cooking grill/plate
Any warranty and guarantee claims shall become void in the
event of improper use of the barbecue or the use of non-approved
fuels. Discolouration, rusting or slight deformation of parts
exposed directly to the flames (cooking grill, hotplate, burner,
flame tamer, etc.) do not impair the function of the barbecue
and, as such, do not form a basis for any warranty claims.
Please retain your receipt in case you need to make a warranty claim.
Placement of the gas cylinder during use
The gas cylinder can be stored in the base cabinet during use, provided
that it does not exceed the specified maximum dimensions (see page
3). Place the gas cylinder in the recess provided for this purpose in
the base.
Larger gas cylinders can also be set up outside of the barbecue as long
as they do not exceed the maximum height of 700 mm.
EC – Declaration of Conformity
We, LANDMANN GmbH & Co. Handels-KG, hereby declare that the
gas appliance described here complies with EU regulation 2016/426.
Conformity has been verified by a type examination according to EN
498:2012 and EN 484:1998.
The type examination was carried out by the notified body Intertek
Testing & Certification Ltd. (0359).
Product identification number: 0359 CR01604
Please contact our service department for further information.
5 years
10 years