4 SIGNALLING MESSAGES DISPLAY
When the tank is empty, display shows the message "LACK OF WATER" alarm, the pump and the
solenoid cannot operate until the tank is filled. To do so, you must turn off the machine using the
green switch on the front part of the machine, unscrew the water cap and fill the water tank, switch
on the machine that will perform the normal startup routine.
WARNING: If there is no water in the tank, the machine will start the alarm 15 seconds.
Water is pumped from tank to the boiler and the pump can be heard as a continuous drone.
When the water level in the boiler touches the probe, the pump stops and the resistance is fed
("HEATING").
12