Cleaning And Care; Technical Data - OK. OKS 100 Manual De Instrucciones

EN
Tare function
This function is designed to weigh additional items separately without removing
11
previous ones from the scale.
Weigh the first item as previously stated. Press the ON/TARE key once. The weight
12
reading changes to .
Add a second item and get its weight. Press the ON/TARE key again. Tare appears
13
on the display and the weight reading changes to again. Repeat the above steps to
weigh further items.
Note: When the TARE items are removed from the appliance, the weight reading is
14
then negative.
Attention! The maximum loading weight of the scale is 5 kg. If the appliance is
15
overloaded,
appliance.

CLEANING AND CARE

Never immerse the appliance in water or other liquids.
16
• Switch the appliance off before cleaning it.
• Clean the appliance with a soft, slightly damp cloth. Make sure that no moisture is
entering the appliance during cleaning.
• Never use corrosive detergents, wire brushes, abrasive scourers, metal or sharp
implements to clean your appliance.
• Dry the appliance thoroughly after cleaning.
• Store the appliance in a cool and dry place, away from children and pets.

TECHNICAL DATA

Power supply (battery) :
Max. loading weight
Weight increments
DISPOSAL
The crossed-out wheeled bin logo requires the separate collection of waste electric
and electronic equipment (WEEE). Electric and electronic equipment may contain
dangerous and hazardous substances. Do not dispose of this appliance as unsorted
municipal waste. Return it to a designated collection point for the recycling of WEEE.
By doing so, you will help to conserve resources and protect the environment.
Contact your retailer or local authorities for more information.
100_A6_140320 (1.4).indb 14
appears on the display. Remove some items to avoid damaging the
3 V , (CR2032)
: 5 kg (11 lb)
: 1 g (0.35 oz)
14
20/3/14 7:54