Weidmuller MCP BASIC 2 Manual De Instrucciones página 26

Device description
Fig. 4.4 Mounting plate for SlimFix markers
Fig. 4.5 Mounting plate for DIN A4 labelling sheets
Adjuster plates
As the various labelling elements do not have a con-
sistent thickness, the different heights need to be bal-
anced out using the adjuster plates. This guarantees
that the surface to be labelled is always at the same
height and can make optimum contact with the plot-
ter pen. The position the adjuster plate should have
is defined by the software for each labelling job (see
Chapter 5.4).
Stop mode / STOP key
If necessary, you can put the plotter into stop mode
(e.g.to stop a write process). Use the STOP key to
switch between operating and stop mode. In stop
mode, the STOP LED lights up red.
26
Data memory
If print data is stored in the plotter, the Clear buffer
LED lights up yellow. To cancel a print job, you need to
wipe the data memory (see Chapter 6.2).
1168680000/02/12.2016