Cleaning And Care; Technical Data - OK. Oht 103 Manual De Instrucciones

CLeANING AND CARe

Warning! Before cleaning, switch off the appliance and disconnect it from the
electrical outlet and let it cool completely.
Warning! Never wash the appliance under running tap.
11
• Clean the appliance with a soft, slightly damp cloth. Make sure that no
moisture is entering the appliance during cleaning.
• Never use corrosive detergents, wire brushes, abrasive scourers, metal or sharp
implements to clean your appliance.
• Dry the appliance thoroughly after cleaning.
• Store the appliance in a cool, dry location, away from children and pets.
Lubricating and cleaning the blades
Put 1 to 2 drops of lubricating oil onto the blades.
12
Allow the appliance to run for a few seconds to distribute the oil.
Switch off the appliance again and wipe off the excess oil with a cloth.
If the blade is not aligned well, put a few drops of lubricating oil onto the
13
blades. Allow the appliance to run for a few seconds. Then switch it off and
disconnect it from the power outlet. Loosen the screws slightly and adjust
the blades. Tighten the screws afterwards.

TeCHNICAL DATA

Rated voltage:
Rated power:
Protection class:
DISpOSAL
OHT103_140716_V08.indb 17
230/240 V~, 50 Hz
7 W
Class II
The crossed-out wheeled bin logo requires the separate collection of
waste electric and electronic equipment (WEEE). Electric and electronic
equipment may contain dangerous and hazardous substances. Do not
dispose of this appliance as unsorted municipal waste. Return it to a
designated collection point for the recycling of WEEE. By doing so, you
will help to conserve resources and protect the environment. Contact
your retailer or local authorities for more information.
17
EN
7/16/14 10:01