U-Tec Ultraloq UL3 Serie Guía De Usuario página 7

Factory Defaults
Factory default setting is that any fingerprint or PIN code can open the door.
Register Admin and User
Admin account must be created first before any other programming.
Then use the Admin account to add or delete the other accounts.
Admin PIN code & User PIN code
Admin PIN code & User PIN code can be 4 to 8 numbers.
User ID number
User ID can be 1 to 8 numbers.
Admin and User capacity
You can register up to 95 fingerprints and 95 PIN codes. Each Admin or User can
enroll at least one fingerprint or PIN code.
Basic programming steps
1. Activate lock. Press and hold
2. Input number to select functions:
1
Add User
3
Passage Mode
7
Add Admin
3. Press and follow the displayed messages to setup.
Reset the lock
1. Remove the battery cover.
2. Find a small paper clip and stick one end into the reset button hole while the
lock is active.
3. Press and hold the reset button for 3 seconds until a beep is audible.
Lock Programming
for 3 seconds to enter the menu.
2 Delete User
4
Lockout Mode
8
Clear Admin
(All user Information will be deleted.)
- 6 -