PRODUCT SPECIFICATIONS
Battery Voltage - 18 V DC
Charger Input - 120 V, AC only, 60 Hz
Charge Time - Approximately 60 minutes
NOTE: Charge time is dependent on the
type of battery pack and level of existing
charge.
KNOW YOUR CHARGER
See Figure 1.
The safe use of this product requires an
understanding of the information on the
product and in this operator's manual.
Before use of this product, familiarize
yourself with all operating features and
safety rules.
B
A
ProTeam
FEATURES
DIAGNOSTIC FEEDBACK
PACKS
LEDs provide feedback to indicate
whether the battery pack is charging,
fully charged, defective, or too hot or
cold to charge.
ENERGY SAVE MODE
Energy Save Mode allows the charger to
conserve energy by charging batteries only
as needed, and also protects the cells and
maximizes the life of your batteries.
KEY HOLE HANGER
The charger has a key hole hanging
feature for convenient, space saving
storage. Screws should be installed so
that the center distance is 2-3/8 in.
Figure 1
A - Battery port
B - Grooves
C - 2-3/8 in. distance
D - Key hole hanger
C
2-3/8 in.
(60 mm [2-3/8 po],
60 mm [2-3/8 pulg.])
D
5