König Electronic KN-LED60 Manual De Uso página 4

Mounted on light stand
The light can also be mounted on a tripod or light stand using the 1/4x20 thread in the foot.
Side bracket
Using the side bracket
If you would like to use the side bracket, simply attach the side bracket to the bottom of a camera or
camcorder using the 1/4x20 threaded knob, and then slip the KN-LED60 light (along with the locking
adapter attached) onto the accessory shoe and tighten the knurled ring.
First mount the adapter... ...then screw the locking adapter
on the adapter for Sony®
Using the adapter to fit Sony® camcorders
The Sony® adapter must be placed onto the camera/camcorder shoe using the aligning pins and slid
into place. While holding the Sony® adapter in it's place, screw the locking adapter (with the ¼-20
thread) on to the Sony® adapter, as you do this, the spring load in the adapter will lock down onto the
camcorder's accessory shoe for a secure fit. Note: If you put the two pieces together first, the spring
lock will tighten down and the foot will not be able to lock into position.
4