English
Cordless drill
Max. torque
Adjustable torque**
Chuck clamping range
Max. drill diameter
Tool holder in drill spindle
Weight (incl. battery pack BP 18 Li 6,2 AS and chuck) as per EPTA procedure
01:2014
Weight with Centrotec, without battery pack.
* Speed specifications with fully charged bat
tery pack.
** The maximum speed is reduced in the lower
torque stages (values in clockwise rotation).
5
Functional description
[1-1]
Torque thumbwheel
[1-2]
Bit store
[1-3]
LED light
[1-4]
Gear switch
[1-5]
Drilling symbol
[1-6]
Screwdriving symbol
[1-7]
Screwdriving/drilling selector switch
[1-8]
Rotational direction switch
[1-9]
On/off switch
[1-10] Belt clip
[1-11] Buttons for releasing the battery pack
[1-12] Insulated gripping surfaces (grey
shaded area)
[1-13] Capacity display button on battery
pack
[1-14] Capacity indicator
Accessories shown or described are not always
included in the scope of delivery.
The specified illustrations appear at the begin
ning of the Operating Instructions.
14
Soft material (wood)
Hard material (metal)
6
Commissioning
6.1
Belt clip
The belt clip allows a shot-term securing of the
device in the work clothes. Insert the belt clip
on the designated side, right or left, and fix it
with the screw [1a].
6.2
Switching on/off[1-9]
Press = ON, release = OFF
The speed can be infinitely adjusted, rela
tive to the pressure applied to the on/off
switch.
The LED light [1-3] lights up when the on/off
switch [1-9] is pressed.
7
Battery pack
7.1
Changing the battery pack
Inserting the battery pack [2a]
Removing the battery pack [2b]
The battery pack is ready to use straight out of
the box and can be charged at any time.
7.2
Capacity indicator
The capacity display [1-14] indicates the charge
of the battery pack for approx. 2 seconds after
the button [1-13] is pressed:
C 18 Li
27 Nm
45 Nm
1st gear
0.8 - 8 Nm
2nd gear
0.5 - 6 Nm
1.5 - 13 mm
Wood
40 mm
Metal
13 mm
1/4''
2 kg
1.0 kg
70–100%
40–70%
15–40%